Alcovisor® Mark X with thermal printer

Mark X is the perfect description for accurate results; the Alcovisor Mark X Breathalyser comes with a detached Thermal Printer. Device can also print results immediately, or store in memory to print at a later stage. The Alcovisor Mark X is one of the newest, cost effective and most innovative fuel cell breathalysers with pinpoint accuracy. The Mark X units, are used in all industries across the world, from police departments to industrial sites, due to their extreme accuracy and ability to retain their calibration over large numbers of tests.

MARK X kits is also certified by the United State National Highway Traffic Safety Administration (NHTSA) and approved and cleared for use by the US-DOT and FDA.

 

 

Technical Details

Sensor Fuel Cell
Working Temp 10°C to 50°C
Storage Temperature -25°C to 70°C
Storage Humidity Not greater than 95%
Size 14.8 x 6.7 x 3.2cm
Weight 255g with batteries
Battery 4AAA alkaline batteries
Battery Life Not Less than 500
Memory 16,000 test
Display 2.4″ TFT colour screen
Response Time 5 Seconds
Sampling System Automatically or manually takes a lung sample
Clock Real time clock
Units of Measure BrAC: mg/L, or any other units
Bac: grm%, mg/ml, mg/100ml, or any other units
Detection Range 0.000 mg/L to 3.000mg/L
Accuracy 0 to 0.10% BAC +/-0.005% BAC
0.10 to 0.20% BAC +/-5%
>0.20% BAC +/-10%
Measuring Mode Active and Passive
Printer Thermal Printer
Connection Type USB

 

Mark X Complete Kit Content

 

  • Hard Plastic Carrying Case
  • 1 Mark X Device
  • Thermal Printer (Optional)
  • 5 Plastic blow tubes
  • 2 Printer Rolls
  • 1 Charger Connector
  • 1 Screening Cup
  • 1 Rechargeable Lithium Battery
  • Instruction Manual

Back to Our products